1KM Laser 37X 1080P Low Power IP67 IP PTZ
Key Features
1KM Laser 37X Optical zoom(5.7-210mm).
Remote optical axis adjustment: adjustment via IE browser and client software
Support wireless antenna transmission
DC 12V, Low power consumption can be less than 45W,Suitable by solar power supply.
Worm gear drive with self-locking function
Protection grade: IP67
Compatible with GB28181, Onvif

Product Highlight
Low power consumption, the smallest can reach ≤45W;
High reliability, protection grade IP67;
Remotely reset the system and upgrade firmware through the network;
Support GPS/Beidou, dual-mode positioning and time calibration (optional);
Worm gear and worm drive, with self-locking function

Model SVN-37PTX901L1
Sensor 1/1.8” Progressive scanning CMOS
Total pixels 2.0MP
Minimum illumination Color:0.0005Lux@(F1.2,AGC ON), b/w:0.00001Lux(F1.2,AGC ON)
Video resolution 50Hz: 25fps(1920*1080,1280*960,1280*720); 60Hz:30fps(1920*1080,1280*960,1280*720)
Lens focal length F=5.7~210mm, 37x optical zoom
Lens aperture F1.5~4.8,automatic / manual
Electronic Shutter 1/25~1/100000s,automatic / manual
Day/Night Switch ICR
Fill light Laser module
Complement distance <=1000m
Light emission wavelength 808±10nm
Laser chip power 2.0W
Control mode 485 Control
Pan Range 360° Continuous
Speed (H) 0.1~50°/S
Tilt Range -90~90°
Speed (V) 0.1~100°/S
Positioning accuracy ±0.15°
3D function supports the functions of picture frame enlargement, target locking and field center
Information display Time OSD, custom OSD
Automatic cruise Support, focal length matching with PTZ speed, 8 cruise scans
Watch function On/off, automatically call the preset point after staying in the idle state for a specified time
Remote upgrade Support remote upgrade of movement and gimbal at the same time
communication protocol PECLO+VISCA
Real-time angle return Support real-time angle return or query angle return function
Angle control Support
Preset points \ cruise Support 255 preset positions
Driving mode Synchronous belt
Behavior detection Cross-border detection, regional intrusion, entry area, departure area, defect detection, rapid movement, personnel gathering, illegal parking, remnant detection, item removal detection
Intelligent Recognition Face detection
Abnormal detection Scene change detection, audio steep rise / steep fall detection, audio presence detection, virtual focus detection
PTZ Interface
Communication Interface 1 channel adaptive RJ45 Ethernet port
RS485 controller interface Support adaptive Pelco-P, Pelco-D and other protocols, baud rate 2400, 4800, 9600, 19200 optional
External input 2 channel alarm input
Output port 2 channel alarm output / 1 channel relay output
Application Programming Interface Support ONVIF 2.0, GD 28181 protocol, support SDK and third-party platform access
Auxiliary function
Smart wiper Manual control, speed gear is optional
Fan/heating Real-time temperature detection, pure physical detection
Waterproof respirator Built-in 2 waterproof respirators to reduce fog and condensation
GPS positioning GPS/Beidou, dual-mode positioning and time adjustment (optional)
Power Supply DC12V/5.0A
Power Consumption ≤ 45W
Working Environment -40℃~60℃,0~95%(no condensation)
Protection level IP67, built-in 4000V lightning protection, anti-surge and anti-surge protection
Installation method Column, wall, corner
Entry cable Side outlet
Dimension L490.0mm×W205.0mm×H350.0mm
Product weight 10kg
Bearing weight ≤5kg (Including module protective cover)
Bearer mode Side load